NatSol does not usually carry out installation of its products. Instead we supply instructions and are keen to discuss the process with your contractor.
Installation typically requires a 4 tonne machine, or larger, to carry out excavation and to lower the vaults into the ground. Assembly of the vaults and building requires general building skills.
We can offer supervision for an agreed fee should this be required. In most cases we hope to avoid supervision in order to minimise costs.
We are, of course, very concerned that work is carried out to a high standard by a competent builder who is familiar with all relevant health and safety procedures for the work involved and who will read our instructions and risk assessment thoroughly before the installation day.
We have a list of contractors who we believe to have carried out satisfactory installations. Prospective clients can obtain quotes from these contractors if they wish to. However, the inclusion of a contractor on this list does not constitute a recommendation and it must be understood that the contract for the construction is between the client and the contractor.
We try to ensure that instructions are sent out to contractors when the job is first discussed and we are happy to talk to them about these. A further set including SITE SPECIFIC VAULT INSTALLATION GUIDANCE is sent with the boxed components before the installation day. With reasonable notice we are usually available by phone to answer any questions that may arise on the day.
A range of files relating to installation are available to download here:
- General information including risk assessment, personnel and tool requirements
- Site and soakaway layout
- Vault installation
- NatSol METAL building erection & fitting out
- NatSol WOODEN building erection & fitting out
- Guidance for manufacturing your own building
- Internal layout drawing for wheelchair access
- Checklist of photos required if NatSol building IS supplied
- Checklist of photos required if NatSol building NOT supplied