The downloads on this page are provided to help builders and designers who opt for non-standard solutions. Specials can often be supplied by NatSol or might be self-built to your own design.
These drawings do NOT in themselves constitute planning drawings and would need to be adapted to meet your particular requirements.
Sample drawings for timber building with double pitched roof:
Roof pitch can vary to fit with any existing buildings. Roof structure supplied by NatSol, roof cladding supplied by the client:
Images and notes for a lean-to timber building:
This may be particularly useful for churches. Roof pitch can vary to fit with any existing buildings. Roof structure supplied by NatSol, roof cladding supplied by the client:
Design your own:
You will need this disabled access internal layout drawing which shows the position of grab rails and other fittings. If you are having a ZD2 then the floor is exactly the same size but there are fewer grab rails and some floor apertures are different:-
This drawing shows the required footprint of a stand alone building to fit with our in-ground vaults and gives some general advice. The floor markings shown relate to the FAC but the ZD2 chamber is the same size and the same criteria apply for designing your own building:-
Sketchup model to download:
If you are a familiar with the free Sketchup application then this file of the NatSol Full Access Composter base will be useful as a starting point for your design:-
- Download Sketchup file for designers
Technical drawings for our in-ground twin vault chamber are available on request and will be useful if you intend to incorporate the vaults into a larger building with other functions. Please discuss with us early in the design process.
SOME DRAWINGS MAY BE UNDER REVISION. PLEASE CHECK WITH US.